Who Still Makes a 257 Roberts Rifle? Current Options

Who Still Makes a 257 Roberts Rifle? Current Options

Only a handful of makers still chamber the .257 Roberts. Ruger and Kimber are the two names that come up most often for new rifles, and the rest of the market is used guns, leftover stock and custom builds.

The cartridge is not dead, but it is a niche. Factory runs are small and tend to come and go, so you have to know where to look.

This guide covers who currently offers the .257 Roberts, which used rifles are worth chasing, and when a custom build makes sense. It also covers ammo, brass and handloading, since those matter as much as the rifle.

Keep reading to find the best route to owning one.

Key Takeaways

  • Ruger and Kimber are the best-known makers that have recently offered new rifles in .257 Roberts.
  • Many new .257 Roberts rifles are limited runs or distributor exclusives, so availability changes from year to year.
  • Used Remington, Winchester and Ruger rifles fill the gap and are often the cheapest way in.
  • A custom build or rebarrel is a realistic option if you want a lightweight, personal rifle.
  • Ammo and brass are still made, but selection is narrower than for popular calibers, so many owners handload.

Who Still Makes a.257 Roberts Rifle Today?

Walnut-stocked bolt action rifle of the type chambered in .257 Roberts

The short answer is Ruger and Kimber. A hunting-industry write-up noted that Kimber offers its Hunter line chambered in .257 Roberts, and Ruger still makes its Model No. 1 in .257. Forum owners also report that Kimber still offers it in a few limited versions of its bolt gun.

Recent sales listings show another Ruger option: the M77 Hawkeye in .257 Roberts. One listing shows a new M77 Hawkeye sold for $1,050, and the same model appears repeatedly in new-condition sales through 2026. Many of these carry a distributor-exclusive catalog number, which is why you will not always see them in a maker’s main lineup.

Treat this as a snapshot, not a promise. Catalogs change, and a rifle that is listed today may be sold out next season. Always check a maker’s current website or ask a dealer what is actually in stock.

Why So Few Companies Offer It

The .257 Roberts sits in a crowded middle ground. One industry source said it has suffered from the no-man’s land that is quarter-bore cartridges. The .243 Winchester, .25-06 Remington and 6.5 Creedmoor all compete for the same hunters.

Because demand is small, makers tend to produce it in limited batches. Those batches sell, then disappear until the next run.

Factory Rifles to Look For

If you want a new rifle, these are the models that have shown up in recent listings and reports. Availability, finish and price change often, so use the table as a starting point for your search.

Maker Model Action What to know
Ruger M77 Hawkeye Bolt action Walnut stock, 22-inch barrel and four-round capacity in one listed version
Ruger No. 1 Single shot Single-shot design; recent new sales listings were well above bolt-action prices
Kimber Hunter / Montana / 84M Bolt action Lightweight rifles that turn up in limited runs
Custom shops Built to order Varies Chosen action, barrel and stock; lead time and cost vary

What They Cost

Prices move, so speak in ranges. One tracker of sold listings put the average at about $1,157 for a new .257 Roberts rifle and about $1,130 for a used one. Note how close those two numbers are. Used rifles are not always the bargain you would expect, because collectors and hunters both want them.

A new Ruger No. 1 costs a lot more. One new No. 1 sold for $2,602, for example. Treat sold-listing data as a rough guide only.

Used and Discontinued.257 Roberts Rifles

The used market is where most buyers end up. Several classic bolt actions were chambered in the Roberts over the years, and clean examples still trade regularly.

  • Remington Model 700 and Model 722: Both have appeared in recent sold listings, including a Model 700 Classic limited edition in .257 Roberts. Remington has issued special .257 Roberts runs of its 700 Classic before.
  • Winchester Model 70 Featherweight: A new-condition Model 70 Featherweight in .257 Roberts sold in early 2026, which shows that old new-in-box stock still surfaces.
  • Older Ruger rifles: Earlier Ruger M77 versions show up used, and some retailers still hold unsold new stock.

One outdoor publication put it plainly: other discontinued firearms from Ruger and Winchester can still be found new in the box, but those are getting rarer.

Used Rifle Buying Checklist

  • Unload the rifle and check that the chamber and magazine are empty before you handle it.
  • Confirm the chambering stamp on the barrel reads .257 Roberts. Do not confuse it with .25-06 Remington or .257 Weatherby Magnum, which are different cartridges and not interchangeable.
  • Check the bore for pitting and the crown for damage.
  • Look for rust under the stock line and at the receiver ring.
  • Ask whether it was shot with standard or hot handloads. Older actions should never be fed loads beyond their design.

Pro tip: Check the chambering stamp on every rifle yourself, because .257 Roberts, .25-06 and .257 Weatherby look alike on a listing but are not interchangeable.

Building a Custom.257 Roberts Rifle

Gunsmith workbench with rifle barrel and action for a custom .257 Roberts build

If factory stock is thin, a custom rifle is a real alternative. Forum owners point out that a small builder can chamber almost any action in the Roberts. One poster noted that a custom shop could make one for under $1,000 if you do not go too fancy. That is one person’s report, so get a written quote before you commit.

Common routes include:

  • Rebarreling a short-action rifle: A gunsmith fits a new .257 Roberts barrel to a suitable action.
  • Building on a new action: You choose the action, barrel, trigger and stock for a lightweight mountain or deer rifle.
  • Buying a prebuilt custom: Some small shops list finished rifles.

Chambering, headspacing and barrel fitting are gunsmithing work. Use a qualified gunsmith, not a home workshop experiment. Whoever builds the rifle, ask them to confirm that the action is strong enough and in good condition.

Buying a barrel, action or finished rifle is also subject to federal, state and local rules on transfers. Confirm what applies where you live with the ATF, your state agency or a qualified attorney.

Finding Ammo, Brass and Handloading Supplies

You can still buy factory loads. Federal’s custom-loaded .257 Roberts +P uses a 110-grain bullet that leaves the barrel at 3,000 fps. Nosler also lists .257 Roberts +P ammunition and premium brass. Owners also mention that Hornady and Winchester load the cartridge, though Winchester runs may be occasional.

Shelf stock varies a lot between stores, so order ahead or plan around it. This is why many Roberts owners reload. One outdoor writer summed up the situation: hunters hoping to resurrect the .257 must reload their own ammunition and look to used or custom rifles. That is slightly overstated, but handloading does give you more control over bullet weight and velocity.

Standard Versus +P Loads

The .257 Roberts is the only rifle cartridge with an official “+P” designation. +P loads run at higher pressure. Only fire them in a modern rifle that is in good condition and rated for them, and check the rifle maker’s guidance first. Never put +P ammo in an older or questionable action.

Is the.257 Roberts the Right Choice for You?

It suits hunters who like light, mild-recoiling rifles for deer, pronghorn and similar game at moderate range. It also appeals to people who simply enjoy a classic cartridge with history. Ned Roberts developed the round, and Remington took the wildcat into factory production in 1934.

It is less practical if you want shelf-ready ammo at any store. In that case a .243 Winchester or 6.5 Creedmoor may be easier to feed. Neither has the quirky appeal, but both are widely stocked.

Whichever you pick, learn the basics first. Our guide on how to sight in a rifle will help you zero a new .257 Roberts properly. Follow standard safety: treat every gun as loaded, keep the muzzle in a safe direction, keep your finger off the trigger until you are ready to shoot, and unload and verify the chamber before any maintenance.

Frequently Asked Questions

Is the.257 Roberts still in production?

Yes, but at a small scale. Ammunition and brass are made by several companies, and a few rifle makers offer it in limited runs. Check current catalogs, since offerings change.

Does Ruger still make a.257 Roberts?

Ruger has chambered it in the Model 77 Hawkeye and the No. 1 single shot, and new examples have been selling recently. Specific versions may be limited or distributor-only, so ask a dealer to confirm what is currently available.

Is the.257 Roberts a good deer cartridge?

Yes. With well-chosen bullets and good shot placement, it is a capable deer round with light recoil. It has less reach than the .25-06 Remington, so it suits moderate ranges best.

Can I fire.257 Roberts +P in any.257 Roberts rifle?

No. +P loads produce higher pressure and should only be used in rifles that are in good condition and made for them. Check the owner’s manual or ask the maker if you are unsure.

Conclusion

If you are asking who still makes a .257 Roberts rifle, the honest answer is a few makers, in limited quantities. Ruger and Kimber are your best bets for new guns. Used Remington, Winchester and Ruger rifles, plus custom builds, fill in the rest.

Check current catalogs, compare sold prices, and confirm local transfer rules before you buy. Line up a source for ammo or brass at the same time, so the rifle does not sit unused.

The .257 Roberts rewards patience. Find a good rifle, learn it well, and you will own one of the most pleasant deer cartridges ever made.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *